Somebody asked for a help thread of how to remove bearings, so i got this idea.


HOW TO INSERT/REMOVE BEARINGS

Inserting Bearings w/ tool:

http://i92.photobucket.com/albums/l6/tomf128/IMG_0692.jpg

1) Put the bearing on your tool with the back facing outward.

http://i92.photobucket.com/albums/l6/tomf128/IMG_0694.jpg

2) Put your wheel on the ground, and push downward until you here a click noise. That means you have it in ( i reccomend that you push the bearing down on the truck when your done, just to make sure its fully in ). take the wheel off and put it back on. If it goes on fine and spins fine, that means you have it in.


Removing Bearings w/ tool:

1) Put your wheel on your truck axle. Don't let axle go through the top bearing, or else it wont come out.

http://i92.photobucket.com/albums/l6/tomf128/IMG_0699.jpg

2) Push your tool handle downward until the bearing pops out.

_ _ _ _

I hope this helped people

Thats awesome, some Mod needs to get this stickied. WINK WINK NUDGE NUDGE

Very simple, easy to understand, Sticky'd :) I like it, and heck, if 1 person can learn off of it, its worth it! Nice work S-M!

thanks everyone

Very nice guide... But what I dont get is how can someone not know how 2?

Very nice guide... But what I dont get is how can someone not know how 2?
I was very confused at first, and someone made a help thread, so i thought i should make this to prevent more help threads.

Oh lol, I figured It out when I first got my skateboard and he did the bearings for me. The taking out part I just kinda knew how to do that. But once again nice guide.

I do it without a tool by inserting pushing it in via hand and removing the bearing by sticking the bearing in not to far on the truck and pry it out.

ok i dont have tool any sugestions?

Push them in by hand.
Take them out by prying them out with a screwdriver. Thats what i did with my bones, and it didnt affect them in any way. Hope this helped :icon_drib

Very nice guide... But what I dont get is how can someone not know how 2?


Mabs they aint ever dun it b4 Like me 4 instance...
if u no how to y r u reading this forum?

i use my trucks axel to pry it out it works as long asyou do it properly

That was the hardest thing I've ever had to do.


lol, Just kidding. :tongue: Thanks for the tips. I pretty much already knew what I had to do, but the guide was still helpful. :)

Thanks for the tip ill have to try that sometime,i usually just pry it off with my truck.

I just beaten them in with a hammer.
now I know how to do it right

Don't take this the wrong way but it takes someone with half a brain to pop a bearing out...... I still liked it though.