Hey all.

I got some new 58mm ´Dura´ roller wheels and I want to set them up on some indy trucks.
Will they fit on 139ś without raiser blocks or will I need to go to 149ś.

I´m about 75kgs. I want to set up a board a little larger but keep it low as possible to the ground.

the 139 or 149 indicate deck width.. not how high it is.. i'm pretty sure there are 139 highs/lows as well as 149 highs/lows

149 - 8.25 inch - 8.75 inch deck width
139 - 7.75 inch - 8.25 inch deck width

you will most likely need risers... unless you are going to ride them real tight

139 is a tad to big for 7.75. im guessing your board is between 7.5"-8". grab some 129s. if you ride em lose, maybe get some risers depending on how much you need.

or you can have fun with it and cut notches into your board where you get wheelbite. thatd make it VERY interesting. having your wheels come up over the top of your board when carving around. lol

I have some set up at the moment my son is riding (originally set up for myself heś scored it) measuring inner width between the wheels 139mm so I would guess thats what they are.

How would I tell if they are highs or lows?

Tight is ok - keep my kids off it;-)
The deck is 8.5 inches wide

the nut on the kingpin will be about the same height as the hanger if they are lows... alittle higher if they are mids.. and noticeably higher if they are highs... post some picks and maybe we'll be able to see...

I posted pics in a new thread. By what you said i reckon lows. Didnt know you could get mids-