hey i really want a grinding rail but my dad won't let me get one. i want to build one but i dont know how. do you know how to build one out of objects that most people will have?

instead of asking for one you can always earn the money to buy it and ask your dad then or you can buy a sick rail from sickrails.com. if that doesnt work but rail instead of rails

i used a piece of wood and waxed the ends of it and boardslided it. it worked for me.

make one outta pvc or angle iron

fin buildin site , get a scafold pole. get some dricks the sort with the 3 holes through make it your hieght . slot the sacafold pole through the brick holes give it a week you need some new bricks its a vicios cycle . i tried tat once the brick split and i gave up ..

Use an I-beam.

Ummm, disregard all above suggestions besides the angle iron.

Instead of building a rail you could build a box. If you was to search google it would give you plenty of plans, and they are not very expensive/hard to make.
If you want a rail... don't buy it. It's a ****ing rip off. I'm assuming you don't know how to weld so it would be hard for you to make one, but maybe you have other family who can weld. If not do what I did when I was younger, take a 2x4 and put angle iron on both sides. Then prop it up however you feel would work. Don't go out buying any rails though.

um is it because there expensive?

because theres this little white rail at zumies thats like 20 bucks, it pretty fun though :/


i suggest getting a flatbar if you make one.